Proper Use Of Car Air Conditioning for Environment

Car air conditioning plays an essential role in relieving you from the unbearable heat on a hot day. As a result, it’s ranked as one of the top features in the vehicle since rolling of the windows on some occasions do not entirely solve the issue. Therefore, you need to know how to use your car air conditioning properly to reduce fuel mileage and any other excessive stress offered to the engine. Thus, put the following tips into practice to improve the efficiency of your AC in addition to ensuring that you’re using this feature correctly to prevent avoidable and unnecessary damages.

Park your car in the shade

If you want to maximise AC efficiency, always park your car in the shade. Yes, you may this as insignificant, but, it is a vital way through you can improve the AC’s performance. It is a recommendable point mostly when you’re sure you will not be available for the entire afternoon. By parking your car in a place covered from direct sunlight, you will lower the temperatures inside the vehicle by the time you get back, no matter how hot it gets.

Rolling the windows down

Another vital way through which you can cool down your car is by rolling down its windows and then driving at a lower speed, which does not exceed 10 to miles per hour. By doing this, it becomes easy for fresh air to enter the car while forcing the hot air out.

Starting with a low setting

When you instantly crank the car air conditioning in Gold Coast to its extreme level, you can cause a faster tear and wear, which in turn causes overheating since more energy than the usual one is needed for rapid cool, and this happens without warming up.  Immediately you start by turning the air on; it is good to start with the lower setting and then allowing it to warm up at a smaller extent before setting the higher levels if the surrounding weather is unbearable.

Recirculation of the air in the car

Using the recirculation option and the air conditioning in the car, make sure that hot from the outside does not gain access into the vehicle. Do this while air conditioning is on its running state, as you try to cool the interior. When the interior is on the cooling downstate, the air conditioning won’t strain hard to continue cooling.

Never shut off the air instantly

Mostly, turning off the vehicle immediately before turning off air conditioning, is the major improper treatments of your vehicle’s air conditioning. After turning the air off, you should leave the fan running in the intermediate speed to dry out the evaporator of the AC. If you cannot do this, the AC will be near ice, and this can lead to condensation, which in turn forms puddle water under the car. Therefore, when you leave the fan in the running state, you reduce condensation and moisture build-up and hence, prevent bacteria and moss build up on the evaporator and any other parts of the car.

Keep not of fuel efficiency

When the air conditioning is on its high setting, you reduce fuel efficiency. Therefore, to increase fuel efficiency, never overuse air conditioning, and cut into your vehicle’s fuel levels.

How Oil Drilling Companies Have Become More Environmentally Friendly

Oil Drilling Companies have a notoriously bad reputation. When you think of these large corporations you often think of water pollution, poor air quality, and even the bad effects they have on wildlife. Luckily, Oil Drilling Companies have made great strides in the last several years to change this stereotype, particularly some of the smaller, environmentally conscious drilling companies like Hagstrom Drilling. Here are some of the ways they are becoming more environmentally friendly.

Big Oil Drilling Companies are using their large amounts of money for research. They are trying to figure out ways they can do their job in a more sustainable manner. For instance, Exxon is trying to scientifically research ways they can reduce greenhouse gas emissions. They are also trying to think of ways consumers’ emissions can be reduced.

Oil Drilling Companies are also committed to creating more green energy. This can be in the form of fossil fuels or biofuels. BP has spent billions on extracting fossil fuels in recent years. It is believed that consumers will start using much more biofuels in the future, and BP is trying to make sure this actually happens. They are trying to create energy from windmills, plants, and trees. These types of energy are easy to create and can be replenished very quickly. It is estimated that much of our earth will turn to biofuels in the next 30 years.

This is helping repair BP’s image after the horrible oil spill in 2010. If anything good came out of that tragedy, it is that BP has become much more environmentally aware.

A new technology can actually separate oil from sand. The MCW Energy Group is championing this amazing technology. It requires only safe chemicals, not high temperatures, and is safe for the air.

Sunoco is working hard to become much more green. They use new methods that help conserve large amounts of water. They also try to keep waste as minimal as they possibly can.

Oil Drilling Companies have also become much more transparent. They disclose what they are doing to become more environmental conscience. And they are supposed to disclose what they need to do better. This is a huge benefit for consumers as they can see clearly which companies they are supporting. It also holds the large Oil Drilling Companies accountable. They can no longer hide from the public. People want to know what is going on, and luckily, the Oil Drilling Companies are listening.

In underdeveloped countries, there is no transparency. And this has become a major problem. No one can enforce laws or regulations because no one is quite sure what is happening behind these closed doors. This is mostly because these struggling countries are not holding these large companies accountable.

While the big Oil Companies are making huge changes there is still a lot of work to be done. Oil Companies need to create plans that can help both the environment and its consumers. They need to treat their employees fairly despite the drilling location. Luckily, the Oil Drilling Companies are aware of these problems and are looking for solutions.

The Best Bathroom Design Ideas To Save Water

There have been frequent droughts forcing people to realize that they need to save water. It is tough going for a few weeks without running water, especially when everything in your household runs with water. Well, you can always start small by designing your bathroom to include ideas that allow you to save water. Here are some of the top ideas from WA Assett you should consider immediately.

Keep in mind that you use more water in the bathroom, even more than the kitchen. So if you need to save water, your bathroom needs an immediate and dramatic effect. You can reduce your water consumption and make your bathroom redesign part of an eco-friendly solution to save water.

1. Eco-Friendly Shower Heads

If you take time to do your due diligence, you will find numerous options for eco-friendly shower heads from various manufacturers. You can start by reducing the time you leave your shower running especially when you are brushing your hair or shaving since you are always wasting water. Additionally, you should take baths less frequently since you are using double the amount of water when taking a bath.

Shower head technology has improved over the last couple years allowing you to combine saving water with have an amazing spray mechanism and even adding a little music to your shower routine. With the right type of shower head, you can save as much as 40% of water

2. Update Your Toilet

Did you know that you waste a lot of water when flushing your toilet? Well, if you haven’t upgraded your toilet in a while, especially for the last decade, then you are definitely wasting water. For instance, in the last few years, manufacturers have come up with new toilet designs that save at least 5.5% of water with every flush. You can always opt to switch from the single-flush toilet design to the dual-flush where you can choose between a full or half flush and save a lot of money.

3. Remove Your Leaky Faucets

Do you have a leaky faucet in your bathroom that you have been meaning to change but never got around to it? Well, if you want to save some water in your bathroom, you need to change it immediately. You can save as much as 30% of water leaking from your bathroom if you have the right type of faucet. If your faucet is leaking at least 60 drops every minute, you are losing as much as 2000 litres of water every year. Browse through various faucet options in the market to find the right one for your bathroom and avoid wasting water.

4. Install Water Aerators

You should think about installing water aerators on all your bathroom faucets to start saving water immediately. They reduce the wastage of water since the limit the flow of water from the faucets. They can also save energy by limiting the flow of hot water, allowing you to use less hot water than usual. Find the best water aerators for your faucets for the best results.

A Few Environmental Benefits Of Colorbond Steel Fencing

Many homeowners believe that a steel fencing solution needs to be as cheap as possible. They don’t seem to care about the fact that low quality steel needs to be repainted and perhaps replaced quite often. This approach is wrong for at least two reasons. First of all, it costs more in the long run. Secondly, it has a negative impact on the environment. If we don’t change our thinking in such matters, our planet may cease to exist as we know it. Choosing a high quality fencing solution would help you save money and protect the environment. If you don’t know how to do it, you may want to start by learning more about Colorbond, an Australian steel that can change the way you think about your fencing.

There are a few good reasons for choosing Colorbond steel fencing over all other available options. All these reasons lead to the point that this material has excellent environmental benefits, as you are going to see in this article, below.

Colorbond steel fencing has a smaller environmental footprint than similar materials, thanks to its special manufacturing technology which uses fewer resources and lasts for much longer. Since fewer resources are needed to produce this fencing, it has a lower impact on the environment. This is something we can’t afford to neglect any longer, since the ozone layer is getting thinner and thinner.

The fact that Colorbond steel fencing looks better for longer is yet another reason to choose it over all other alternatives on the market. The secret lies in the advanced paint technology that results in an extremely durable coat. This layer is resistant to chipping, scratching, peeling and cracking, being therefore able to maintain an impeccable look for a very long time. Besides, it is available in a wide range of colors, so you won’t have problems in finding the one that matches your house and your landscape.

Fences made from Colorbond steel are lightweight and very easy to install. This is yet another benefit, as they require less work. This results in less carbon dioxide emissions, thus contributing to the protection of the environment.

Colorbond steel is made from recycled content. In addition, it is 100% recyclable. By choosing this fencing solution, not only you’re going to help protecting the environment by not needing to repaint it that often, but you’ll also be able to recycle it. This is good for both your wallet and the environment, hence the massive popularity of this material all over Australia. The recycling trend is here to stay, as it provides huge benefits to the environment. It allows us to save our natural resources, by making the most out of what has already been manufactured with huge expenses of energy. This is something everybody should become aware of, as the continuous use of limited resources on our planet will eventually lead to their depletion. This is what makes Colorbond steel one of the best choices when it comes to building fences or other constructions.

Features To Consider When Designing Your Eco-Friendly Home

As more and more people become aware of protecting the environment along with the concept of green building, architects, designers and builders are now adding green elements in each home that’s built. With the emergence of modern construction concepts and advancement in technology, you can now incorporate these features without compromising the overall appeal of your dream custom home.

Well, despite the increased interest by various domains regarding green building, many people still do not have a clear understanding of what a green home constitutes and how such structures are designed and built. An Eco-friendly home has beneficial effects on the overall well-being and health of your family and it’s also a financially sound option.

When building your dream home, one thing you should prioritise is decreasing carbon emissions. You have already heard of global warming, and carbon emissions are the primary cause. However, most homes are not environmentally friendly enough to help reduce the emissions. If it continues, glacier melting, an increase in water levels, disappearance of land and flooding might all happen, which is no good news. Well, if you are planning to build a custom green home, there are several features that you should consider during the design stage and this article will mention some of them.

Begin with an environmentally friendly property, one that is big enough to accommodate everyone and its maintenance cost is efficient and effective. It should not be too large or too small that you are sardine together.

The location is ideally important. You should consider being part of a green community with homes that have Eco-friendly features.

A green home should use sustainable materials during its construction. You should choose organic or renewable materials.

An Eco-friendly home should have energy efficient appliances, regardless of their size.

An environmentally friendly home should also be well insulated. Most green homes have a noble gas layer that is designed to conserve heat during winter and keep smooth, cool and fresh air in the warmer seasons.

You should also consider a solar system in order to harness the renewable and free energy of the sun. A solar system is an essential component in a green home as it helps reduce your carbon footprint and also saves you on utility bills.

High-efficiency carbon, smoke and radon detectors all tied to the energy consumption and security monitors are other Eco-home features that you should consider. They ascertain easy management.

The paints you intend to use should be non-toxic or non-volatile, thus creating a safe and healthy environment for everyone.

The home should also merge drought-resistant plants and trees in the landscaping, which affects water consumption. The drainage system should also be ideal and focused on conserving rainwater.

As a last tip, we would like to share something that will help you save more energy. Green homes usually come with a renewable, non-toxic ranging from 16 to 20 inches in the attic. Older houses were lucky to have 8” of insulation, but since you are designing your own custom home, you can bring it up to a minimum of 16” which will bring down your energy bills by 25%.

How to Reduce Your Impact on the Environment While Traveling

Scientists have discovered that mass traveling can be harmful to the environment, as it contributes to the global pollution that kills our planet by destroying its ozone layer. It is, therefore, our duty of honour to reduce our carbon footprint whenever possible. One action may not have a big influence, but millions of such actions can make a difference for the future of our world.

One thing you can do without altering your comfort and your lifestyle is to reduce your impact on the environment while traveling. There are several simple yet effective ideas that would enable you to travel without affecting the planet.

Choosing to stay in eco friendly hotels is perhaps the best way to protect the environment. These hotels reuse water for their toilet flushing systems. They also recycle their waste and buy accessories made from recycled materials. Furthermore, they instruct their guests on reusing their bathroom towels, in order to save water and to reduce the pollution generated by the use of laundry detergents. As a matter of fact, you can help these hotels even further by taking shorter showers and by switching off all your electronics while not using them. There is even some luxury accommodation in Fremantle such as The Tradewinds Hotel that is very eco friendly.

Consider renting a bicycle instead of a car or a motorbike whenever possible. Cycling is good for you, so you’ll have the opportunity to do a good deed while working on your fitness level. If hiring a motorised vehicle is a must, you can opt for an electric one. Electric cars have become quite widespread nowadays, so you’ll probably find one to suit your needs, particularly when you travel to touristic destinations. Public transport may be an interesting option, so try to identify some routes that would help you avoid driving. Many countries and cities have very good public transport networks that are an excellent alternative to hiring a vehicle at your destination.

Bring a reusable water bottle and a shopping bag. If all travelers followed your example, the amount of plastic in landfills and oceans would decrease. Besides, by carrying an empty water bottle on you while hiking in less polluted places such as Iceland and New Zealand, you’ll have the opportunity to fill it with the purest drinking water you can find on Earth.

When searching for flights, try to choose the route with the least number of stop-overs. Taking offs and landings are fuel hogs, resulting in a massive increase of the carbon footprint of an aircraft. By choosing direct flights you also do yourself a favour, as your journeys will be shorter. Moreover, since travelling to and from a destination are the most polluting parts of a trip, consider taking longer vacations.

While hiking in national parks, always pick up your trash. Furthermore, consider picking up other people’s trash, as well. Use only the boardwalks and the routes that are designated to visitors. Be respectful, as this is the best way to avoid damaging those fragile ecosystems.

By doing your best to protect the environment while traveling, you are going to feel much better about yourself. This reason alone is well worth the trouble!

How The Logistics Industry Is Reducing Its Environmental Impact

In this day and age, people in every industry need to be thinking about the impact they are having on the environment. It’s important for companies to take steps to reduce their carbon footprint. Here’s how the logistics industry is changing their practices:

Using Environmentally-Friendly Packaging

Packaging is an essential component of the logistics process. That’s why many logistics and sea freight companies are switching to green packing materials. It’s common to see companies using recycled materials in their packaging when appropriate. Companies are also focusing on using biodegradable materials, like paper and biodegradable plastics.

Many potentially harmful packaging materials, like corrugated cardboard, have been replaced. Companies are evaluating the packaging materials that they use and making positive changes whenever possible.

In addition to improving the materials used in packaging, a lot of companies are simplifying their current packaging. Companies are eliminating materials that are inessential. Their goal is to use less packaging overall.

Improving Transportation Practices

Once products are packaged, they must be transported to their destination. This is another essential aspect of the logistics industry. Companies are evaluating their current transportation practices and seeing how they can change them.

A number of companies are switching to hybrid or natural gas vehicles. Switching to these kinds of vehicles allows companies to spend less on fuel, and it also allows them to reduce their emissions.

Many companies are starting to use green technology in their transportation vehicles. They are working to improve every aspect of the transportation process, including transportation management.

Focusing On Green Warehouses

The top companies in the logistics industry are trying to improve in every conceivable way. This includes improving their warehouses. Companies are making small changes that allow them to improve the energy efficiency and sustainability of their warehouses.

A fantastic example of this are the heating and cooling systems used in warehouses. It can be difficult to efficiently heat or cool a warehouse because of its size. Switching to an energy efficient HVAC system allows companies to control the temperature of their warehouse while consuming less energy overall.

Many companies are also changing the pallets that they use in the warehouse. It’s becoming increasingly common to see plastic pallets in warehouses, rather than the wood pallets that were once standard. Warehouses are also focused on reducing material consumption and reusing whatever materials they can.

Using Smaller Containers

A lot of companies are using smaller containers for their cargo when possible. Containers that are small in size are much easier to transport than large containers.

Switching to small containers allows companies to automate some of their processes. It also makes it easier for companies to load and unload products. Like many green practices, switching to smaller containers also allows companies to boost their productivity.

No industry can remain stagnant. The logistics industry is going through a lot of changes, and most of these changes are a big improvement. The logistics industry is working to reduce its environmental impact and become a greener industry overall.

5 modern ways in which farmers are saving water

There are many places where people experience drought. This has a huge impact on farming. There are now some modern techniques that farmers use today to decrease the use of water.

1. Drip irrigation

This system provides water to the plant’s roots directly. It reduces evaporation that takes place when using spray watering systems. They water during the cooler part of the day. This system can save about 80% water than the conventional irrigation.

2. Drought-tolerant crops

Farmers are now growing crops that are suitable to that region’s climate. There are some crops that are drought tolerant, like tepary beans, orach, Armenian cucumbers, etc.

3. Dry farming

Some farmers don’t irrigate. They rely on the soil moisture to produce the crops. This requires special tilling practices. One disadvantage is that dry farming practices produce lower yields than the irrigated crops.

4. Rotational grazing

This is a process by which livestock is moved between fields. This can increase the water absorption of fields and decrease water runoff. It makes pastures more drought-resistant.

5. Compost and Mulch

Compost can improve the structure of the soil and increase the soil’s water-holding capacity. Mulch is spread on top of the soil and it helps in conserving moisture. Mulch and compost can help certain crops to retain more water in the soil.

These practices help in conserving water. Many farmers are using these practices on their agricultural land. These methods of farming waste less water and help to grow crop even in dry climate.

4 simple ways to stop wasting water

Water is very important for all living things to survive on earth. There are many places where water is scarce and people can’t get much access to water. We should stop wasting water so that other people can get their share as well. Here are some simple ways to do so.

Check for any leak

If there is any leak in the house, you should fix it immediately. Lots of water gets wasted because of leaks. You can call a plumber to fix it or get a DIY kit from the hardware store to take care of it by yourself.

Wash your yard in the morning or evening

Morning or evening is the best times to water your yard. Less water will be used at these times as the sun’s heat is weak. If you wash your yard in broad daylight, the water will evaporate quickly and you will need to use more water.

Take shorter shower

People often use the shower as an opportunity to relax. But you shouldn’t waste water during shower. You should shampoo your hair and wash your body. You shouldn’t stay in the shower for longer hours.

Don’t throw things in the toilet

If you throw things like tissue paper in the toilet, you will need to flush it. Every time you flush you waste seven gallons of water. So, use your trash can instead and save water.

You shouldn’t keep the water tap open when not in use. You should use water only when necessary and use a limited amount of water. This way you won’t deprive others of getting water for their needs.

5 major causes of water pollution

Most water pollution occurs due to human activities and industrialization. The water bodies are polluted with industrial, agricultural and municipal wastes. Here are the most common causes of water pollution.

Domestic sewage


These wastes are generated from household activities. The wastes contain urine, faeces, laundry waste, etc. These wastes may contain waterborne diseases. Diarrhea, typhoid, cholera, dysentery, etc. occur due to polluted water. Domestic sewage contains phosphorus and nitrates which cause an unwanted algal bloom in ponds and lakes. These affect the water quality negatively.

Industrial wastewater


These are wastewater generated through industrial processing. Wastes from iron and steel industry, food industry, chemicals industry, etc. pollute the water. These can contain toxic materials like heavy metals. When the waste stream mix with the natural water bodies, they become harmful to human and other organisms.

Agricultural waste


These include pesticide, chemical fertilizer, manure, etc. Runoff from agricultural fields and farmland can go to the nearby ponds, lakes streams, etc. These wastes can seep through the ground and cause ground water pollution.

Acid rain


Sulphur and nitrogen oxides are very toxic and they can get into the atmosphere through emissions of industry or automobiles. These combine with the atmospheric water and produce acids. These get mixed with rainwater causing acid rain.

Global warming


Greenhouse gases like carbon dioxide are generated due to industrialization or burning of fossil fuels. These create a blanket in the atmosphere and traps heat. It causes the global temperature to rise. As a result, the water temperature increases as well. This affects the aquatic habitats and can affect the food chain as well.

Water pollution is a very serious problem. We should be careful that our activities don’t cause water pollution that affects human lives and also the life of aquatic organisms.